Universal Urethane Clearcoat 4.2 VOC

You looking to find the "Universal Urethane Clearcoat 4.2 VOC" Good news! You can purchase Universal Urethane Clearcoat 4.2 VOC with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $79.00    

Product Feature

• USC UNIVERSAL URETHANE 4.2 VOC CLEARCOAT
• EXCELLENT GLOSS RETENSION
• SANDS EASY
• EASY BUFF

Product Description

USC UNIVERSAL URETHANE CLEAR COAT,4.2 VOC, MIX RATIO: 4:1 Technical Data: DESCRIPTION: U.S. Chemical & Plastics' 10 Universal Urethane Clearcoat offers excellent performance and appearance at an economical price. 10 Universal Clearcoat flows out to a smooth, durable finish with excellent gloss. USC 10 Clear is ideal for spot, panel, multi-panel and overall refinishing. HEALTH & SAFETY: Read all warnings, first aid and safety for all components before using. Keep out of reach of children and animals. Wear a properly fitting NIOSH/MSHA approved respirator. Select positive pressure supplied respirator (TC-19C or equivalent) for isocyanates. Follow the respirator manufacturer's directions for use. Protect hands with impervious rubber gloves. Wear face, skin and eye protection. USC products are for industrial use by professional, trained painters. Form: TDSUSC10 06/09 MIX RATIO: 4:1 Combine components by volume. Mix thoroughly and strain before using. • 4 Parts USC 10 Universal Urethane Clearcoat 4.2 VOC �� 1 Part USC 12 Fast or 14 Slow Activator POT LIFE: 2 - 4 Hours (@ 72� F / 22 C) SURFACE PREPARATION: Make repairs as needed. Mask vehicle to protect from overspray. Apply basecoat color to repair area and allow to dry according to paint manufacturer's recommendations. GUN SET UP: Conventional: 1.3mm - 1.5mm HVLP: 1.3mm - 1.4mm AIR PRESSURE: Conventional: 35 - 40 psi at the gun HVLP: 8 - 10 psi at the cap APPLICATION: 2 - 3 medium wet coats FLASH TIME: 8 - 10 minutes in between coats (@ 72� F / 22� C) DRY TIME TO BUFF: 18 - 24 hours after the last coat (@ 72� F / 22° C). Bake: 30 minutes @ 140 F / 60 � C Excessive film build, and cool temperatures, will extend dry times. PHYSICAL PROPERTIES: (Ready To Spray) VOC: 4.2 lbs./gallon Theoretical Coverage: 480 sq. ft. @ 1.0 mil Weight Solids: 35.0% Recommended Dried Film Thickness: 2.0 mils CLEARCOAT PRODUCT: 10 UNIVERSAL URETHANE

Universal Urethane Clearcoat 4.2 VOC Review

I tried this kit for the first time and it was very easy to use. It sprayed so nice that buffing was barely needed. As long as it holds up, I will definitely use this again.

Most of the consumer Reviews tell that the "Universal Urethane Clearcoat 4.2 VOC" are high quality item. You can read each testimony from consumers to find out cons and pros from Universal Urethane Clearcoat 4.2 VOC ...